CAT Connection to Yaesu FTDX 5000

Discussions about everything to do with SDRuno
Post Reply
G1NZO
Posts: 3
Joined: Sun Jul 01, 2018 2:40 pm

CAT Connection to Yaesu FTDX 5000

Post by G1NZO » Mon Jul 02, 2018 6:36 pm

Trying to Get the CAT connection working between SDRPlay and Yaesu FTDX 5000

works on another program so lead is OK

COM 3
Rate 38400
No RTS

anyone done this
Last edited by G1NZO on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Roger
Posts: 217
Joined: Fri Dec 29, 2017 7:59 pm

Re: CAT Connection to Yaesu FTDX 5000

Post by Roger » Mon Jul 02, 2018 11:15 pm

The Yaesu FTDX5000 uses a serial port so you must be using a USB to serial adapter. You seemed to indicate this is working with another program.

You need to make sure Omni-Rig is running in your system and then you have selected Rig 1 and set the Yaesu 5000 as your rig. Then you need to set the right COM port, baud rate, and number of stop bits. In SDRuno you have to go into Main Settings and under ORIG see if the Yaesu is responding. If that is OK go into the VRX you want to connect (usually the default one) and set everything up as shown below. You also have to select RSYN1 on the VRX window as shown below. There are more details in the User Manual pages 56-57.
yaesu.png
yaesu.png (121.66 KiB) Viewed 7575 times

Reason: No reason

Post Reply