No frequency change when clicking memory entry

Discussions about everything to do with SDRuno
Post Reply
Fractal1
Posts: 65
Joined: Sun Feb 21, 2016 6:06 am

No frequency change when clicking memory entry

Post by Fractal1 » Mon Jul 23, 2018 9:58 am

Hi all,

I'm running the RSP1a and SDRUNo 1.22 on a windows 7 machine. Recently i have been unable to select any memory entry. Clicking on an entry does nothing. I can still edit as per normal and change freqs. manually. I uninstalled/reinstalled 1.22 with no change. The issue seemed to occur after a session where i ran 2 VRX for a while. Is there anything else i can try?

Thanks.

Reason: No reason

Patrick73
Posts: 76
Joined: Thu May 31, 2018 9:39 am

Re: No frequency change when clicking memory entry

Post by Patrick73 » Mon Jul 23, 2018 10:23 am

Is MCTR ticked in RX Control panel ?

Reason: No reason

Paul
Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Re: No frequency change when clicking memory entry

Post by Paul » Mon Jul 23, 2018 1:19 pm

Easy to overlook but -
Have you "MCTR" deselected in the RX control panel?
Just submitted - looks like an echo...

Reason: No reason

Fractal1
Posts: 65
Joined: Sun Feb 21, 2016 6:06 am

Re: No frequency change when clicking memory entry

Post by Fractal1 » Tue Jul 24, 2018 12:40 am

That was it! I did indeed overlook the MCTR button :roll: . Many thanks Patrick and Paul!

Reason: No reason

Post Reply