Filter by VRX Frequency - possible enhan

Discussions about everything to do with SDRuno
Post Reply
I2SVA
Posts: 18
Joined: Wed Jul 25, 2018 7:27 am

Filter by VRX Frequency - possible enhan

Post by I2SVA » Mon Nov 05, 2018 7:12 pm

Hi all,

after having read a thread I tested "Filter by VRX Frequency". It is an useful function but I suggest the following small changes:
- The filter is accurate to 1Hz; if you tune at + or - 1 Hz or more from the stored frequency it does not show anything; it should be much better to have it locked to 1KHz digit (or perhaps +/- 500Hz). This way you can see that you are approaching a stored frequency.
- What about enabling Markers on the Main SP window to highlight the frequencies stored in the active bank folder of the Mem. Panel?

Thanks, 73

Alessandro I2SVA

Reason: No reason

pnoelw
Posts: 18
Joined: Sun Feb 19, 2017 2:07 pm

Re: Filter by VRX Frequency - possible enhan

Post by pnoelw » Tue Nov 06, 2018 4:51 pm

I'll second that, Allesandro.

"Filter by VRX frequency" is a great feature but does require frequency "latitude" to make it really useful. Also agree that the latitude should be 0.5kHz or even 1kHz. This is very releavant in the aero band with 8.33kHz channels.

Noel.

Reason: No reason

Post Reply