Page 1 of 1

Filter by VRX Frequency - possible enhan

Posted: Mon Nov 05, 2018 7:12 pm
by I2SVA
Hi all,

after having read a thread I tested "Filter by VRX Frequency". It is an useful function but I suggest the following small changes:
- The filter is accurate to 1Hz; if you tune at + or - 1 Hz or more from the stored frequency it does not show anything; it should be much better to have it locked to 1KHz digit (or perhaps +/- 500Hz). This way you can see that you are approaching a stored frequency.
- What about enabling Markers on the Main SP window to highlight the frequencies stored in the active bank folder of the Mem. Panel?

Thanks, 73

Alessandro I2SVA

Re: Filter by VRX Frequency - possible enhan

Posted: Tue Nov 06, 2018 4:51 pm
by pnoelw
I'll second that, Allesandro.

"Filter by VRX frequency" is a great feature but does require frequency "latitude" to make it really useful. Also agree that the latitude should be 0.5kHz or even 1kHz. This is very releavant in the aero band with 8.33kHz channels.