Very slow start of SDRuno 1min 10s

Discussions about everything to do with SDRuno
K3EK-F5MWA
Posts: 2
Joined: Sat Nov 24, 2018 3:18 am

Very slow start of SDRuno 1min 10s

Postby K3EK-F5MWA » Sat Nov 24, 2018 3:35 am

Hello everybody,

I started using SDRuno with the RSP2Pro and was very happy with it.
I bought the SDRduo and installed the new software. The installation was fine, but I've to wait for more than 1 minute to have the program started.
Otherwise no other problems. CAT works fine, everything seems just fine. Has somebody else noticed this kind of behavior? Could there be a conflict with the old SDRuno which I unistalled some time ago? Perhaps has some data remained in the registry? The computer works fine with either SDRConsole 3 or HDSDR which start in seconds.

Thank you in advance for your help.
Kind regards
Ezio K3EK - F5MWA
Last edited by K3EK-F5MWA on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

g1hbe
Posts: 383
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: Very slow start of SDRuno 1min 10s

Postby g1hbe » Sat Nov 24, 2018 9:18 am

Hi Ezio.

It might be worth trying 'reset to factory settings' in the MAIN/OPT menu.

Reason: No reason
Andy

K3EK-F5MWA
Posts: 2
Joined: Sat Nov 24, 2018 3:18 am

Re: Very slow start of SDRuno 1min 10s

Postby K3EK-F5MWA » Sat Nov 24, 2018 8:51 pm

Hello Andy,

Many thanks for the suggestion which I quickly applied but with almost no results, the time was only shortened by 10 seconds...Prior to the resetting, the program asked if I agreed that all registry would be reset and I accepted.
I tried to reinstall with same results. I used Revo unistaller to make sure all registry entries were deleted but this did not help either. All other programs, HDSDR and Console V 3 pop up in seconds as the previous SDRuno I used with the RSP2Pro (and which was uninstalled). I'll have to contact the SDRPlay support to ask for help. My computer is an I5 with Windows 10, 8Gb memory and a 1 Tb SSD, so the problem is elsewhere.
Thanks again for trying.

73

Ezio - K3EK/F5MWA
Last edited by K3EK-F5MWA on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Mike2459
Posts: 136
Joined: Mon Jul 24, 2017 8:24 pm

Re: Very slow start of SDRuno 1min 10s

Postby Mike2459 » Mon Nov 26, 2018 12:15 pm

You can use Windows 10 Pro's Performance Monitor to view the PC's activity while SDRUno is starting. It may provide a hint. Also review the event log at that point in time.

Reason: No reason


Return to “SDRuno”

Who is online

Users browsing this forum: No registered users and 11 guests