make sdruono easier to read

Discussions about everything to do with SDRuno
Post Reply
n9mfk
Posts: 11
Joined: Mon Jul 01, 2019 10:28 pm

make sdruono easier to read

Post by n9mfk » Fri Jul 05, 2019 10:57 pm

Hi all,
does anyone have any tips/tricks to make sdruno easier to read
thanks Beau
Last edited by n9mfk on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

User avatar
mikeladd
Posts: 191
Joined: Wed Jul 08, 2015 3:18 am

Re: make sdruono easier to read

Post by mikeladd » Sat Jul 06, 2019 11:40 pm

You can try lowering your systems display resolution.

Reason: No reason

User avatar
mikeladd
Posts: 191
Joined: Wed Jul 08, 2015 3:18 am

Re: make sdruono easier to read

Post by mikeladd » Sun Jul 07, 2019 12:55 am

I forgot to add the following that SDRuno auto populates its panels based on preset resolutions. This is valid only for an unaltered "default" workspace.
Which is workspace 0

Try the following.

Lower your system resolution
Launch SDRuno
Select an unused Workspace from the MAIN panel. 1-9
You will only see the MAIN panel
Click the MAIN panel SETT. button.
Select the AUTO LAYOUT option
Select DEFAULT

SDRuno will now rebuild the panels based its preset resolution to match your system resolution
(as shown on page 21 of the SDRuno manual)
https://www.sdrplay.com/docs/SDRplay_SD ... Manual.pdf

Hope this makes sense :)

Reason: No reason

Post Reply