Wow, thanks!

Discussions about everything to do with SDRuno
Post Reply
g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Wow, thanks!

Post by g1hbe » Sun Jun 19, 2016 4:41 pm

Free as well! After downloading and installing, I struggled for a while and finally realised I should read the manual. I'm impressed, but sometimes find myself unable to move the tuning ribbon - is this a bug or a feature?
Second, when looking around VLF, I find that sometimes all the expected signals are present but sometimes they are not. Seems random, but it's possibly happening whenever 0Hz is showing on the spectrum display. When this happens the software seems rather unresponsive to frequency inputs (ie entering a new frequency does nothing).
I know it's early days, so no doubt these issues will work their way through the system. Thanks again for your efforts.
Last edited by g1hbe on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Andy

g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: Wow, thanks!

Post by g1hbe » Mon Jun 20, 2016 1:20 pm

A bit more info on the VLF problems. I have two frequencies stored in memory - one at around 243 MHz, the other 60 KHz. If I recall the VHF one it works perfectly, but when I click on the VLF one it does not work. The digital frequency readout changes to 60 KHz, but the spectrum and waterfall continue showing the 243 MHz signals. Directly entering a frequency does not work either. Definitely something slightly awry I think!
Last edited by g1hbe on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Andy

g7jur
Posts: 8
Joined: Mon Nov 16, 2015 9:55 pm

Re: Wow, thanks!

Post by g7jur » Mon Jun 20, 2016 10:12 pm

I have seen this problem as well.
Last edited by g7jur on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

NN4F
Posts: 128
Joined: Fri Apr 03, 2015 1:54 pm
Location: Ridgeville, SC
Contact:

Re: Wow, thanks!

Post by NN4F » Tue Jun 21, 2016 9:44 pm

If you are zoomed out the ribbon will not move, change by increasing the frequency on the RX panel, zoom in and the scale ribbon will slide
and to slide quicker, hold the shift key down...

Paul - NN4F
Last edited by NN4F on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
--
Paul Jones - NN4F, Charleston SC
http://www.facebook.com/groups/SDRPlay

Post Reply