New UNO 1.02 and VLF

Discussions about everything to do with SDRuno
Post Reply
g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

New UNO 1.02 and VLF

Post by g1hbe » Thu Jun 23, 2016 8:46 am

Many thanks for the update - the odd tuning now seems to be fixed, but I'm not hearing much below about 50KHz. There are some strong-ish sigs around 22KHz which are easily heard on my other receivers, but there is no trace of them on the SRP?? MSF is there on 60 KHz, but it all tails off as I tune lower.
Last edited by g1hbe on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Andy

g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: New UNO 1.02 and VLF

Post by g1hbe » Thu Jun 23, 2016 5:59 pm

Oh-oh. I think the VLF tuning is not quite fixed. Several times over the last couple of hours, the tuning has just stopped as I have been tuning downwards from 100KHz towards 20 KHz. As I tune, the numbers change but the actual reception doesn't!
Last edited by g1hbe on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Andy

K0ODjeff
Posts: 2
Joined: Fri Jun 24, 2016 2:50 am

Re: New UNO 1.02 and VLF

Post by K0ODjeff » Fri Jun 24, 2016 1:08 pm

Yes, Andy, I spotted continuing problems AFTER installing v 1.02 yesterday. Still locks up sometimes, for example. On the very considerable plus side, SDRplay hears well on longwave and with very few spurs. I'm still learning the bare basics of SDRUno, like how to save a workspace.
Last edited by K0ODjeff on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

jon
Posts: 433
Joined: Tue Jan 06, 2015 10:48 am

Re: New UNO 1.02 and VLF

Post by jon » Fri Jun 24, 2016 2:45 pm

K0ODjeff wrote:Yes, Andy, I spotted continuing problems AFTER installing v 1.02 yesterday. Still locks up sometimes, for example. On the very considerable plus side, SDRplay hears well on longwave and with very few spurs. I'm still learning the bare basics of SDRUno, like how to save a workspace.
see end of this video for how to save a workspace https://youtu.be/85crr8eF8dQ
Last edited by jon on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

K0ODjeff
Posts: 2
Joined: Fri Jun 24, 2016 2:50 am

Re: New UNO 1.02 and VLF

Post by K0ODjeff » Fri Jun 24, 2016 2:59 pm

Jon. I finally figured out how to save workspaces yesterday after failing a few times. For a time I had thought that feature might not be compatible with my old Windows 7.

I did watch your excellent video. Keep those videos coming.
Last edited by K0ODjeff on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply