Page 1 of 1
Scan
Posted: Sat Aug 15, 2015 9:03 am
by Scooby300
Hi All
Can you scan through frequencencys on the sdrplay like you can on a scanner sort off a blind scan
Thanks
Re: Scan
Posted: Sat Aug 15, 2015 1:22 pm
by Tech_Support
Dear Scooby300,
In principle this should be perfectly possible as long as you use appropriate scanning software. You would of course also need an appropriate antenna system for such a wide range of frequencies. Perhaps someone has experience of this and can recommend something. Alternatively, if you are a Facebook user, you might try asking someone on the public Facebook group:
https://www.facebook.com/groups/sdrplay/?fref=ts
Sincerely
SDRplay Tech_Support
Re: Scan
Posted: Tue Aug 18, 2015 9:45 pm
by Scooby300
Hi Admin
Thanks for your reply but I am not on Facebook & are not about to go on it so if anyone on here would like to help it would be much appreciated.
Thanks
John
Re: Scan
Posted: Sun Aug 23, 2015 8:58 am
by srsp2282
SDR# Has some plugins that allow scanning specific frequencies or an entire range. (Similar to a traditional scanner, but with more control) If you google "sdrsharp frequency scanner" you'll get many articles and videos on how to set this up, that will be far more articulate than anything I could ramble out