P25 Trunking

General discussions
Post Reply
rickn6pe
Posts: 1
Joined: Sat Feb 25, 2017 1:11 am

P25 Trunking

Post by rickn6pe » Mon Feb 27, 2017 4:18 pm

How can I used SDRPlay 1 to receive trunked signals? It does not work with Unitrunker.

Thanks,

Rick N6PE
Last edited by rickn6pe on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

CaptainNemo
Posts: 146
Joined: Mon Jan 05, 2015 1:22 pm
Location: Genoa - Italy

Re: P25 Trunking

Post by CaptainNemo » Fri Mar 10, 2017 7:24 pm

You can try with DSD+ (aka dsdplus).
You need the following "set-up" (in synth): a front end software supporting sdrplay (e.g. sdr#) --> vb-cable --> dsd+
(btw: unfortunately sdr# do not support completely sdrplay, so, for example you cannot use useful sdr# plugin like "dsd+ plugin"
nevertheless you can run it by hands...)

Last "general available" version is DSD+ 1.101 (is what I'm using currently)
As far as I know this version supports: NXDN48/96, DMR, MotoTRBO, APCO P25 ph1, X2-TDMA, ProVoice, D-Star (no audio), dPMR(no audio)
The "general available" (= downloadable) version is rather "old". There is a newer version deployed as "fastlane"
(means you pay few dollars and they give you a link to download -- more ore less -- I never tried...).

Hope it helps.

Bye
Gio

Reason: No reason

CaptainNemo
Posts: 146
Joined: Mon Jan 05, 2015 1:22 pm
Location: Genoa - Italy

Re: P25 Trunking

Post by CaptainNemo » Sat Mar 11, 2017 4:40 pm

I forgot to say... if you use the "old" sdr# build 1361 (+ sdrplay device controller 3.8.3) you can
use the DSD interface plugin for sdr#.

bye
gio

Reason: No reason

Post Reply