Page 1 of 1

getting started android tablet with RSP2

Posted: Wed Apr 05, 2017 1:55 pm
by wireman
Hi all, What cable and app do i use for a standard android tablet please ?

Re: getting started android tablet with RSP2

Posted: Thu Apr 06, 2017 2:11 pm
by W2DLC
You need to download the beta SDRPlay driver first. Then there are a couple of apps available. The best is probably SDR Touch. The cable is called OTG cable, but you can get one with a plug to provide power, and that might be best. Just make sure it will power the tablet while transmitting data. some won't .

Re: getting started android tablet with RSP2

Posted: Mon Apr 10, 2017 10:58 am
by pticafilin
At this moment there are android apps supporting only RSP1.
As far I know RSP2 is not supported yet.

Re: getting started android tablet with RSP2

Posted: Fri Apr 14, 2017 12:05 am
by wireman
ok thanks for the info guys

Re: getting started android tablet with RSP2

Posted: Sun Apr 16, 2017 5:59 am
by ekendraed
Would like to know if and when RSP2 PRO will work with an Android Tab. Thank you

Re: getting started android tablet with RSP2

Posted: Fri Apr 28, 2017 7:59 pm
by mikeladd
Best bet is to check the blog section. As soon as it get update from SDRtouch I am sure Jon will post the information ASAP


http://www.sdrplay.com/blog/