Original SDRPlay

General discussions
Post Reply
w5ggh
Posts: 24
Joined: Fri May 08, 2015 8:51 pm

Original SDRPlay

Post by w5ggh » Fri May 12, 2017 9:54 pm

Was wondering how one could get the pc board out of the original SDRPlay with only that small little trap door to work with....?

Gary
w5ggh

Reason: No reason

g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: Original SDRPlay

Post by g1hbe » Fri May 12, 2017 11:05 pm

I have one of the old blue & white ones and IIRC the case just cracks apart with a bit of persuasion.

Reason: No reason
Andy

w5ggh
Posts: 24
Joined: Fri May 08, 2015 8:51 pm

Re: Original SDRPlay

Post by w5ggh » Sat May 13, 2017 3:34 pm

Like to find metal project box for the original.....seems like the ones that bought the first SDRPlay's have been left out in the cold when it comes to hardware upgrades.


Gary
w5ggh

Reason: No reason


w5ggh
Posts: 24
Joined: Fri May 08, 2015 8:51 pm

Re: Original SDRPlay

Post by w5ggh » Sun May 14, 2017 11:58 am

And those boxes will work for the original sdrplay in the blue & white case......assuming one can get the pc board out without damaging anything...since the little door on the case isn't big enough to remove anything...

Gary
w5ggh

Reason: No reason

Tech_Support
Posts: 499
Joined: Mon Jun 01, 2015 7:00 pm

Re: Original SDRPlay

Post by Tech_Support » Sun May 14, 2017 2:43 pm

Hello Gary,
Yes they will. The older style case comes apart by removing the ends. The case then separates into its two halves.

Sincerely

SDRplay Tech_Support

Reason: No reason

w5ggh
Posts: 24
Joined: Fri May 08, 2015 8:51 pm

Re: Original SDRPlay

Post by w5ggh » Sun May 14, 2017 3:12 pm

Okay.......I'm convinced.....thank you for your prompt replies.

Gary
w5ggh

Reason: No reason

Post Reply