Help with Calibration Console V3

General discussions
Post Reply
KO4XJ
Posts: 1
Joined: Fri Sep 29, 2017 1:03 am

Help with Calibration Console V3

Post by KO4XJ » Sat Nov 18, 2017 10:24 pm

I have a RSP2 I bought 2 months ago to use as a panadapter with a Ten Tec Orion 1 and I have the PAT board installed for the buffer amp.
After weeks trying to get SDRUno to work I gave up and have SDRConsole V3 working for what I want. But here's my issue(s)

To hear the same signal on the laptop and radio at the same freq I had to adjust the PPM on the Calibration screen but to get 40 and 80m to work I had to adjust -170ppm and for 15, 17 and 20m I had to adjust +490ppm.

Just to check with WWV at 5Mhz and 15Mhz I had to adjust +159.5 and +158.5ppm.

As you can see I'm all over the place and am I doing it wrong to calibrate?

Also I'm using 2048Khz as the bandwidth

Any help would appreciated

73
John
KO4XJ
Last edited by KO4XJ on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply