Using an RSP1 w/SDRtouch on a Google Pixel 2 phone
-
- Posts: 2
- Joined: Wed Dec 27, 2017 6:46 pm
Using an RSP1 w/SDRtouch on a Google Pixel 2 phone
Greetings All,
Has anyone tried running an RSP1 (not the 1a) on a Google Pixel 2 (released oct 2017) with the SDRplay driver and SDR touch? I can't seem to get mine working.
I'm getting the following message when trying to start SDRtouch with the RSP1 connected via my USB OTG adapter:
"Device was found but cannot be open. This
may indicate that your phone/tablet needs to
be rooted. If it is rooted already, then make
sure you have given SU permission to the
driver."
This same setup works flawlessly on my old Samsung Galaxy S4 phone.
Any ideas?
Has anyone tried running an RSP1 (not the 1a) on a Google Pixel 2 (released oct 2017) with the SDRplay driver and SDR touch? I can't seem to get mine working.
I'm getting the following message when trying to start SDRtouch with the RSP1 connected via my USB OTG adapter:
"Device was found but cannot be open. This
may indicate that your phone/tablet needs to
be rooted. If it is rooted already, then make
sure you have given SU permission to the
driver."
This same setup works flawlessly on my old Samsung Galaxy S4 phone.
Any ideas?
Last edited by SevenFortyOne on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: Using an RSP1 w/SDRtouch on a Google Pixel 2 phone
I use this app to check USB host mode compatibility...
https://play.google.com/store/apps/deta ... s&hl=en_GB
Follow the instructions and make sure you get positive results from all tests.
Best regards,
SDRplay Support
https://play.google.com/store/apps/deta ... s&hl=en_GB
Follow the instructions and make sure you get positive results from all tests.
Best regards,
SDRplay Support
Reason: No reason
-
- Posts: 2
- Joined: Wed Dec 27, 2017 6:46 pm
Re: Using an RSP1 w/SDRtouch on a Google Pixel 2 phone
I ran the USB Host Diagnostic tool and it looks like it's not supported.
Last edited by SevenFortyOne on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason