SDR Console 3.0/OmniRig problem

General discussions
Post Reply
Tom_K1TA
Posts: 1
Joined: Tue Jan 16, 2018 10:33 pm

SDR Console 3.0/OmniRig problem

Post by Tom_K1TA » Tue Jan 16, 2018 10:46 pm

Hello,

I have an SDR Play 2.0 and I am using SDR Console 3.0, works great by itself on my PC.

I also have an Icom IC-7300 and I am running OmniRig too. I can run the OmniRig Client and control the IC-7300 fine. So I think that part is working?

When I click on EXTERNAL Radio on SDR Console 3.0 I get an ERROR that SDR Console cannot open OMNIRIG and I am stumped!

I want to control the SDR Play from my IC-7300 and possibly use it as a PanAdapter. Is there something I am missing in my setup?

Help. Seriously, any Help will be appreciated.

Tom K1TA
Tom@K1TA.com
Last edited by Tom_K1TA on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

User avatar
mikeladd
Posts: 191
Joined: Wed Jul 08, 2015 3:18 am

Re: SDR Console 3.0/OmniRig problem

Post by mikeladd » Wed Jan 17, 2018 2:16 pm

Not sure if you changed any of the CIV settings in the rig but here is my OMNIRIG screen capture and COM PORT capture. Everything must match.
Image

Reason: No reason

Post Reply