tuning knob
tuning knob
there is a cheap tuning knob £10 by mike richards in april. practical wireless has anyone tried it?
barriek
g3mtd
barriek
g3mtd
Last edited by barrykiss on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: tuning knob
No Barry
But are you aware of these:
https://www.rtl-sdr.com/remapping-a-key ... -in-hdsdr/
(at least this would only require the use of one hand to accomplish it's software re-mapping}
https://www.rtl-sdr.com/a-homemade-sdr- ... -pc-mouse/
https://19max63.wordpress.com/2016/05/1 ... b-for-sdr/
FYI: I use one of these - https://www.ebay.co.uk/itm/NEW-Logitech ... SwzgRWxJxt
which I find very flexible in use and easy to tune with (avaiable left or right handed).
But are you aware of these:
https://www.rtl-sdr.com/remapping-a-key ... -in-hdsdr/
(at least this would only require the use of one hand to accomplish it's software re-mapping}
https://www.rtl-sdr.com/a-homemade-sdr- ... -pc-mouse/
https://19max63.wordpress.com/2016/05/1 ... b-for-sdr/
FYI: I use one of these - https://www.ebay.co.uk/itm/NEW-Logitech ... SwzgRWxJxt
which I find very flexible in use and easy to tune with (avaiable left or right handed).
Reason: No reason
Re: tuning knob
hi paul thanks for reply I will give mikes a go!
I was not aware of any of the links I add mike to favourits
my only problem is I cant solder!
my wife is getting good at putting uhf ends on and using windows
inned a long wire to a tree in garden but she draws the line at climbing a ladder
etc.
regards
barrie
I was not aware of any of the links I add mike to favourits
my only problem is I cant solder!
my wife is getting good at putting uhf ends on and using windows
inned a long wire to a tree in garden but she draws the line at climbing a ladder
etc.
regards
barrie
Last edited by barrykiss on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: tuning knob
thanks for reply
I will try to get someone local to build yours
thanks barrie
I will try to get someone local to build yours
thanks barrie
Reason: No reason
Re: tuning knob
Last edited by gm4cid on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason