tuning knob

General discussions
Post Reply
barrykiss
Posts: 8
Joined: Mon Mar 05, 2018 3:56 pm

tuning knob

Post by barrykiss » Thu Mar 15, 2018 9:43 am

there is a cheap tuning knob £10 by mike richards in april. practical wireless has anyone tried it?
barriek
g3mtd
Last edited by barrykiss on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Paul
Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Re: tuning knob

Post by Paul » Thu Mar 15, 2018 6:10 pm

No Barry
But are you aware of these:
https://www.rtl-sdr.com/remapping-a-key ... -in-hdsdr/
(at least this would only require the use of one hand to accomplish it's software re-mapping}
https://www.rtl-sdr.com/a-homemade-sdr- ... -pc-mouse/
https://19max63.wordpress.com/2016/05/1 ... b-for-sdr/
FYI: I use one of these - https://www.ebay.co.uk/itm/NEW-Logitech ... SwzgRWxJxt
which I find very flexible in use and easy to tune with (avaiable left or right handed).

Reason: No reason

barrykiss
Posts: 8
Joined: Mon Mar 05, 2018 3:56 pm

Re: tuning knob

Post by barrykiss » Fri Mar 16, 2018 9:34 am

hi paul thanks for reply I will give mikes a go!
I was not aware of any of the links I add mike to favourits
my only problem is I cant solder!
my wife is getting good at putting uhf ends on and using windows
inned a long wire to a tree in garden but she draws the line at climbing a ladder
etc.
regards

barrie
Last edited by barrykiss on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

barrykiss
Posts: 8
Joined: Mon Mar 05, 2018 3:56 pm

Re: tuning knob

Post by barrykiss » Sat Apr 07, 2018 11:13 am

thanks for reply
I will try to get someone local to build yours
thanks barrie

Reason: No reason

gm4cid
Posts: 5
Joined: Sun Dec 27, 2015 2:42 pm

Re: tuning knob

Post by gm4cid » Fri Jun 15, 2018 4:16 pm

Hi Barrie,
email sent to barrie@kissack.org.uk

73 Bob GM4CID
Last edited by gm4cid on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply