Page 1 of 1

new cubicsdr version include sdrplay

Posted: Tue Nov 10, 2015 12:46 pm
by fe8769
new cubicsdr version include sdrplay

https://github.com/cjcliffe/CubicSDR/releases

Re: new cubicsdr version include sdrplay

Posted: Wed Nov 11, 2015 7:57 am
by CaptainNemo
I gave a fast try to CubicSDR+SDRplay.
Very good impressions.
I had few crashes, absolutely normal at this stage.
The project seems to be very serious and well organized.
Should the community help?

Re: new cubicsdr version include sdrplay

Posted: Wed Nov 11, 2015 10:31 pm
by Fones
Interesting. Well, it works at least. It takes a few seconds to change frequency though. The squelch is quick to set, like HDSDR. You can also drag the top right window between IF and audio. Nice.

Re: new cubicsdr version include sdrplay

Posted: Thu Nov 12, 2015 7:54 pm
by CaptainNemo
Anyone know if Visual Studio 2015 Community is mandatory to build CubicSDR on windows?
Maybe an other "lighter" IDE can do the job?
I want to try a little change... just to try... but the idea to install VS2015 get me in despair...
Bye

Re: new cubicsdr version include sdrplay

Posted: Fri Nov 13, 2015 7:23 pm
by Hombre
When run Cubicsdr fan on my laptop with i7 processor after one minute start to blowing warm air because occupied of processor is about 19%
Cubicsdr do not have CW in the menu.
Frequency marking is confuse because (for example) 7MHz and 20kHz is 7.02 and for me is correct 7.020 or 7020
Do not remember device and must click two ways to start
Must to click on the waterfall to start audio
Have not SDRplay settings menu
Thank you very much but maybe some way in the future with CW, sdrplay menu, comfortable other settings...

Re: new cubicsdr version include sdrplay

Posted: Sat Nov 14, 2015 11:05 am
by vsboost
If you hover your mouse in between the two bars up top and centre of the program you can click where you want the squelch to trip. Hope that helps.

Re: new cubicsdr version include sdrplay

Posted: Mon Nov 16, 2015 8:04 pm
by fe8769
I tried Cubic sdr under ubuntu 14.04 LTS , not yet with sdrplay . It is working but I don't know how to use IQ output and pulseaudio .

using of /dev/dsp isn't working

any ideas .

As soon i ll have the answer , I ll try on with sdplay