Dsd plus e sdr console v3

General discussions
Post Reply
Angyselem
Posts: 3
Joined: Thu Nov 22, 2018 11:40 am

Dsd plus e sdr console v3

Post by Angyselem » Tue Dec 04, 2018 5:16 pm

Hi, I have a problem with SDR console V3 when I start DSD PLUS you do not hear the audio, what is the problem? Ho l' rsp1a
Last edited by Angyselem on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

User avatar
mikeladd
Posts: 191
Joined: Wed Jul 08, 2015 3:18 am

Re: Dsd plus e sdr console v3

Post by mikeladd » Sun Dec 09, 2018 5:19 pm

You need to use VAC or VB cable and select that output within Console v3 as shown

Image

Reason: No reason

Scannerz
Posts: 20
Joined: Tue Oct 20, 2015 1:19 am

Re: Dsd plus e sdr console v3

Post by Scannerz » Sun Dec 09, 2018 9:08 pm

I use vb-audio cable from http://www.vb-audio.com/cable/

Once setup open SPEAKERS in windows select RECORDING and select CABLE OUTPUT as default.
If you get a lot of feedback, Make sure you mute WAVE.
In windows PLAYBACK...Selecting your normal default sound playback device is fine.

If you double click on CABLE OUTPUT find and tick the box for LISTEN TO THIS DEVICE.

SDR-Console select CABLE INPUT for Audio device
Mode = NFM
filter=16khz

This should work well cheers Tony.
Attachments
dsd____000aa.jpg
dsd____000aa.jpg (145.27 KiB) Viewed 13166 times
dsd_03aa.jpg
dsd_03aa.jpg (79.63 KiB) Viewed 13166 times

Reason: No reason

Post Reply