Problem with image 0.5

General discussions
Post Reply
Fab57
Posts: 2
Joined: Mon May 13, 2019 5:45 pm

Problem with image 0.5

Post by Fab57 » Wed May 15, 2019 1:54 pm

Good afternoon,

My Raspberry pi 3 is a model B build in 2015. I use a 3A power supply. I did Sudo apt-get update, upgrade and rip-update but my rsp1a is not seen by the system.
Cubic SDR says: failed to connect to device.
I saw another message like missing libraries or device.

My rsp1a works under windows 10. The Rasp model B seems to be usable with a Sdrplay.

I haven’t found any answers on Internet. Nobody reports a such issue.

Some ideas?

Thank you. 73.
Fabien
Last edited by Fab57 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

AMandaG
Posts: 1
Joined: Mon May 20, 2019 7:03 pm

Re: Problem with image 0.5

Post by AMandaG » Mon May 20, 2019 7:31 pm

Fab57 wrote:Good afternoon,

My Raspberry pi 3 is a model B build in 2015. I use a 3A power supply. I did Sudo apt-get update, upgrade and rip-update but my rsp1a is not seen by the system.
Cubic SDR says: failed to connect to device.
I saw another message like missing libraries or device.

My rsp1a works under windows 10. The Rasp model B seems to be usable with a Sdrplay.

I haven’t found any answers on Internet. Nobody reports a such issue.

Some ideas?

Thank you. 73.
Fabien
I also have the similar isues here that I am facing. If someone can help it would be great.

Thanks in advance,
Regards,
Amanda
Last edited by AMandaG on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Fab57
Posts: 2
Joined: Mon May 13, 2019 5:45 pm

Re: Problem with image 0.5

Post by Fab57 » Sat Jun 01, 2019 8:25 pm

Goodevening,

The issue seems to be coming from the power supply. I bought a new one on Amazon:
https://www.amazon.fr/BERLS-Adaptateur- ... B0768XFP9X

Sorry, it’s Amazon France but I’m sure you will be able to find the same...

Now, it works fine but no sound like some others users :-(

Regards,

Fabien
Last edited by Fab57 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply