dump1090 / RSP2
dump1090 / RSP2
I've had a look around for the answer to this but failed.
Why does dump1090 only support the Port B only?
Does it automatically enable bias-t?
Why does dump1090 only support the Port B only?
Does it automatically enable bias-t?
Last edited by zardoz99 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: dump1090 / RSP2
Looks like the bias-t answer is no. A simple voltmeter test confirmed that. I'm trying out the coaxial colinear with a termination resistor, so didn't want to effectively short out the bias-t supply.
Reason: No reason
Re: dump1090 / RSP2
There is an option to use portA.
You can check it doing on the command prompt.
The option is
You can add the option to the .cmd file you use to start dump1090
You can check it doing
Code: Select all
sdrplay_dump1090.exe --help
The option is
Code: Select all
--rsp2-antenna-portA
Last edited by EA3HUF on Wed Aug 30, 2017 6:17 pm, edited 1 time in total.
Re: dump1090 / RSP2
Sorry, I forgot, there is also an option to enable BiasT. So I assume it is not activated by default (try --help)
Last edited by EA3HUF on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason