SDRplay Community Forum

Hi all,

Its a pretty pity that sdrplay developers cannot make EXTIO dlls for RSP2 within a month (its really 1-2 days of work), and a lack of software for RSP2 is a bit upsetting.

So, I added 3 lines of code, and compiled it myself. Now it works, and I can switch between PortA, PortB and PortZ in HDSDR. Don't know how to set the gain in PortZ mode yet.

Who is interested to test, new DLLs in archive: https://www.dropbox.com/s/vb85z54s4m4tf ... I.zip?dl=1

The official DLL's are now available, I would recommend using those rather than someones self compiled modified dll's

Paul - NN4F

If that's all we have been doing DVE, then I would agree with you!

As Paul said, official ExtIO builds for both RSP1 and RSP2 that support the latest API (which we've also been working on) are out now and can be downloaded from our downloads page (http://www.sdrplay.com/downloads)

Merry Christmas everyone!

SDRplay Support

Hi
Am I the only one to think that the GUI of EXTIO dlls needs work ?
It has a tendency to mask everything on the screen.
There are too many linked boxes.
The main window could show more useful information like use or not of up conversion and actual LO value.
Depending on the software we use it is sometimes hard to know the real center/hardware frequency used.
Apart from that it is very powerful but can be confusing for newcomers.
Best wishes.

There is still a little bug in present dll, when i start software with filter enabled the filter effectively not are enable until i disable and enable again.
Please fix this issue.

73

Tales Amorim, PU9-AKN from GG66PI