Audio on RSP2 suddendly went off.

Post information or questions regarding SDRplay products here
Post Reply
shanes
Posts: 1
Joined: Thu Dec 29, 2016 10:19 pm

Audio on RSP2 suddendly went off.

Post by shanes » Thu Jan 05, 2017 11:57 pm

The audio suddendly when off on a Windows 7 laptop. The soundcard is working fine. Opened the RSP2 main settings window and found that the WME Input Device window is blank. How do I instruct Runo to re-establish a link to the soundcard? Thanks...
Last edited by shanes on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: Audio on RSP2 suddendly went off.

Post by sdrplay » Fri Jan 06, 2017 7:18 am

The Main Window settings are for INPUT so don't do it there. Look in RX Control Window SETT panel - under the OUT tab you will see where you can direct the audio output and select the correct output device. If you can't see the OUT tab, use the left/right arrows to navigate to it.

Best regards,

SDRplay Support

Reason: No reason

Post Reply