SDR Console with RSP-1 FT1000D panadapter

Post information or questions regarding SDRplay products here
Post Reply
Chet
Posts: 3
Joined: Tue Jan 31, 2017 9:14 pm

SDR Console with RSP-1 FT1000D panadapter

Post by Chet » Tue Feb 07, 2017 6:02 pm

Hello all...I'm pretty new to this area and I'm sure this topic has been covered in the past, but I couldn't find an answer. All I'm trying to do is use the FT1000D receiver as a panadapter. I'm not interested in controlling the rig via CAT, just want to display segments of the HF ham bands. The rig provides an I.F. output at 73.62 Mhz. I can feed that to the RSP-1 and can see signals on the SDR Console display centered on the I.F. frequency. I've downloaded Omnirig and have that running. My question is, how do I get the SDR Console display to show the same as the rig ? Not centered at 73.62 Mhz. I don't know how to adjust the software to offset the I.F. frequency. It seems that no matter what offset I enter, moves the output of the SDR Console from the I.F. frequency...?? Any suggestions will be greatly appreciated... tnx in advance..........
Chet
Last edited by Chet on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply