RSP2 not recognized on raspberry pi

Post information or questions regarding SDRplay products here
Post Reply
hb9txb
Posts: 2
Joined: Thu May 25, 2017 7:09 am

RSP2 not recognized on raspberry pi

Post by hb9txb » Fri May 26, 2017 1:50 pm

Hello

My RSP2 receiver is not recognized by raspi:

lsusb shows
pi@raspberrypi:~ $ lsusb
Bus 001 Device 005: ID 1df7:3010
Bus 001 Device 004: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS]
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


pi@raspberrypi:~ $ sudo sdrplay_dump1090 --dev-sdrplay --quiet
Thu May 25 08:51:01 2017 CEST dump1090-mutability dump1090_mutability_sdrplay starting up.
Using sample converter: SC16, integer path
Unable to initialize RSP
Thu May 25 08:51:04 2017 CEST Normal exit.

http://www.raspberrypi-spy.co.uk/2012/0 ... d-version/
Revision : 0010

Already tried to set
#max power for usb
max_usb_current=1

Also tried different power supply, additional power for RSP2 using Y-cable

Terratec RTL dongle and RTL SDR v3 dongle work fine

RSP2 works when attached to my Mac

Please advise
Last edited by hb9txb on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

navzptc
Posts: 7
Joined: Wed Dec 28, 2016 1:18 am

Re: RSP2 not recognized on raspberry pi

Post by navzptc » Sun May 28, 2017 1:10 am

Download the newer 0.2 version - 0.1 did the same with my set up, but 0.2 works fine :)
Last edited by navzptc on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

hb9txb
Posts: 2
Joined: Thu May 25, 2017 7:09 am

Re: RSP2 not recognized on raspberry pi

Post by hb9txb » Fri Jun 02, 2017 5:35 pm

Thanks. SDRplay download offers only ver 0.1
ver 0.2 is at www.sdrplay.com/software/SDRplay_ADS-B_RPi_0.2.run

In the meantime Cocoa1090 is expired ...
Last edited by hb9txb on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply