Page 1 of 1

SDRplay RSP2 adjacent to Raspberry Pi

Posted: Fri Jan 19, 2018 5:25 am
by mcody
I have an SDRplay RSP2 that I am using with a Raspberry Pi 2 (although that may be upgraded to a Raspberry Pi 3 in the future). How close can the Raspberry Pi 2/3 be to the RSP2 and not cause interference? I am considering placing them both in an 8 inch by 10 inch by 3 inch aluminium enclosure. The separation between the RSP2 and the Raspberry Pi would only be 2 or 3 inches. I plan on holding the RSP2 in place with an aluminium bracket, which might provide some additional shielding. Any thoughts or suggestions would be appreciated.

Thanks,

Mac / AE5PH