A Hi-Z Antenna Input For The RSP1A Receiver

Post information or questions regarding SDRplay products here
Post Reply
WB5AGF
Posts: 19
Joined: Sat Feb 17, 2018 6:35 am
Location: Garland, Texas (north side of Dallas)

A Hi-Z Antenna Input For The RSP1A Receiver

Post by WB5AGF » Thu Feb 22, 2018 6:15 am

For those of us with the RSP1A Receiver (I was intrigued by it having a 14-bit A/D) .... we don't have the Hi-Z antenna input that the RSP2 Receiver provides.

Here is a part which looks like it might be useful :

http://www.nooelec.com/store/balun-one-nine.html

(a .jpg image is being uploaded showing the schematic)

The connection to the RSP1A Receiver (50 Ohm unbalanced) would be on the left (shown as connector 'P1') and the Hi-Z (450- Ohm balanced) antenna connections are on the right (labelled as '1' and '2').

- Paul, WB5AGF
. Texas
Attachments
balun_one_nine_schematic.jpg
balun_one_nine_schematic.jpg (45.08 KiB) Viewed 5762 times
Last edited by WB5AGF on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply