RSP1 Linux 18.3 Cinammon Mint Install Problems
Re: RSP1 Linux 18.3 Cinammon Mint Install Problems
If you have a RSP1 have you blacklisted the kernel drivers?
If you type...
lsmod | grep msi
and you see any output then you need to blacklist the drivers as per instructions found earlier in this thread.
If not, can you post what you are seeing from...
SoapySDRUtil --info
SoapySDRUtil --find=sdrplay
ls -l /usr/local/lib/libmir*
Best regards,
SDRplay Support
If you type...
lsmod | grep msi
and you see any output then you need to blacklist the drivers as per instructions found earlier in this thread.
If not, can you post what you are seeing from...
SoapySDRUtil --info
SoapySDRUtil --find=sdrplay
ls -l /usr/local/lib/libmir*
Best regards,
SDRplay Support
Reason: No reason
Re: RSP1 Linux 18.3 Cinammon Mint Install Problems
Thanks for the quick reply. All working fine now.
I did the following:
First, did this from the terminal:
karl@HP-Compaq-6200-Pro-1 ~ $ lsmod | grep msi
msi001 16384 1
msi2500 32768 0
v4l2_common 16384 2 msi001,msi2500
videobuf2_vmalloc 16384 1 msi2500
videobuf2_v4l2 24576 1 msi2500
videobuf2_core 40960 2 msi2500,videobuf2_v4l2
videodev 172032 5 v4l2_common,msi001,msi2500,videobuf2_core,videobuf2_v4l2
karl@HP-Compaq-6200-Pro-1 ~ $
So opened editor and edited /etc/modprobe.d/blacklist.conf and added this at the end:
# to allow SDRplay to be recognized and used with CubicSDR
blacklist msi001
blacklist msi2500
Then rebooted and the RSP1 was found immediately. Pretty simple fix. Thanks for the help.
I did the following:
First, did this from the terminal:
karl@HP-Compaq-6200-Pro-1 ~ $ lsmod | grep msi
msi001 16384 1
msi2500 32768 0
v4l2_common 16384 2 msi001,msi2500
videobuf2_vmalloc 16384 1 msi2500
videobuf2_v4l2 24576 1 msi2500
videobuf2_core 40960 2 msi2500,videobuf2_v4l2
videodev 172032 5 v4l2_common,msi001,msi2500,videobuf2_core,videobuf2_v4l2
karl@HP-Compaq-6200-Pro-1 ~ $
So opened editor and edited /etc/modprobe.d/blacklist.conf and added this at the end:
# to allow SDRplay to be recognized and used with CubicSDR
blacklist msi001
blacklist msi2500
Then rebooted and the RSP1 was found immediately. Pretty simple fix. Thanks for the help.
Last edited by em30bb on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason