RSP2A and RPi 3 B+

Post information or questions regarding SDRplay products here
Forum rules
Post Reply
steve@ecsykes.com
Posts: 1
Joined: Sun Mar 25, 2018 11:04 pm

RSP2A and RPi 3 B+

Post by steve@ecsykes.com » Tue Mar 27, 2018 1:13 pm

I received the new Pi yesterday and installed the image with the required updates. Everything works fine. I put the Pi in a Eleduino metal case with a fan and installed heat sinks. Now what I need to know, how do I get the SoapyRemote app to run upon boot without using the X window? I want to run the receiver headless and only access it remotely.

Steve
Last edited by steve@ecsykes.com on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Top
jrhartley
Posts: 12
Joined: Wed Aug 17, 2016 7:13 am

Re: RSP2A and RPi 3 B+

Post by jrhartley » Wed Mar 28, 2018 4:20 pm

Downloaded the image and my pi3 b+ is stuck at the coloured box, rasbian on the other hand boots.
Was hoping to use one of my rsps with the little beggar...
Last edited by jrhartley on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Top
sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP2A and RPi 3 B+

Post by sdrplay » Wed Mar 28, 2018 8:54 pm

We have an updated image in beta testing for the RPi 3B+, if you would like to take part in the beta test, please send an email to software@sdrplay.com

Best regards,

SDRplay Support

Reason: No reason
Top
jrhartley
Posts: 12
Joined: Wed Aug 17, 2016 7:13 am

Re: RSP2A and RPi 3 B+

Post by jrhartley » Thu Mar 29, 2018 6:10 am

Thanks email sent re beta.
Last edited by jrhartley on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Top
jrhartley
Posts: 12
Joined: Wed Aug 17, 2016 7:13 am

Re: RSP2A and RPi 3 B+

Post by jrhartley » Thu Mar 29, 2018 5:06 pm

Finally, it lives! On board wifi not working need to figure that out next!
Last edited by jrhartley on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Top
sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP2A and RPi 3 B+

Post by sdrplay » Fri Mar 30, 2018 8:33 am

run:

sudo raspi-config

the wifi isn't enabled until this is run. This is also where you can expand your file system if you have a SD card larger than 8GB

Best regards,

SDRplay Support

Reason: No reason
Top
jrhartley
Posts: 12
Joined: Wed Aug 17, 2016 7:13 am

Re: RSP2A and RPi 3 B+

Post by jrhartley » Fri Mar 30, 2018 9:22 am

Nope, still no wifi (or even the adaptor wlan0), lucky I have plenty of hair or I would be bald by now!
Wifi dongle works fine, rsp1 works fine - was running the adsb stuff, had quick look at cubic but no audio - sheesh need another cable...
Last edited by jrhartley on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Top
jrhartley
Posts: 12
Joined: Wed Aug 17, 2016 7:13 am

Re: RSP2A and RPi 3 B+

Post by jrhartley » Fri Mar 30, 2018 9:23 am

as an aside, how many posts needed before the annoying 'moderation' gets lifted???
Last edited by jrhartley on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Top
sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP2A and RPi 3 B+

Post by sdrplay » Fri Mar 30, 2018 9:43 am

I know it can be annoying, but if you were to see the amount of posts and accounts we have to remove, you would see that a clean forum with useful material is worth the slight delay. You should be ok now.

Best regards,

SDRplay Support

Reason: No reason
Top
sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP2A and RPi 3 B+

Post by sdrplay » Fri Mar 30, 2018 9:49 am

I'll be working on the RPi3B+ this weekend so I'll post more info with what I find. We are a very small team and appreciate your patience.

Best regards,

SDRplay Support

Reason: No reason
Top
Post Reply

Return to “SDRplay related”