RSP1A and ADSB

Post information or questions regarding SDRplay products here
Post Reply
RichardG062
Posts: 13
Joined: Mon Dec 18, 2017 7:02 pm

RSP1A and ADSB

Post by RichardG062 » Sun May 06, 2018 6:33 pm

I have two RSP1A receivers connected to my PC and use one for HF and the other for VHF/UHF each with it's own dedicated antenna. I also have installed the SDRUno dump 1090 and virtual radar receiver. In the software there is an option to add a receiver - please could someone explain or point me in the direction of an online guide as how to choose one of my SDR receivers and use this for ADSB/Mode S reception instead of the online receiver the software defaults to. I have a couple of antennas I could use either my wideband discone or a dedicated 1090mhz one. I have worked through and tried various settings in the virtual radar receiver software but without success so far.

Many Thanks

Richard
Last edited by RichardG062 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Richard Griffith

Post Reply