Low limit "Warning Out of Range"

Post information or questions regarding SDRplay products here
Post Reply
Fones
Posts: 17
Joined: Mon Oct 19, 2015 3:42 pm

Low limit "Warning Out of Range"

Post by Fones » Thu Oct 22, 2015 11:06 am

Jon, can you remove the annoying "Warning Out of Range" dialogue box that I'm assuming is generated my the EXTIO when I go under 100 kHz. I can eventually trick HDSDR/SDR# to allow me to tune lower, but it's a bit of a fudge.

Cheers.
Last edited by Fones on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

NN4F
Posts: 128
Joined: Fri Apr 03, 2015 1:54 pm
Location: Ridgeville, SC
Contact:

Re: Low limit "Warning Out of Range"

Post by NN4F » Sat Oct 24, 2015 4:25 am

You can do a registry edit....

To do this you need to manually add the LowerFqLimit key to the registry in HKEY_CURRENT_USER\Software\SDRplay\Settings and then apply a number between 0 and 100 (in decimal). 100 would be 100kHz lower cut off, 50 50kHz and so on.

Paul -NN4F
Last edited by NN4F on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
--
Paul Jones - NN4F, Charleston SC
http://www.facebook.com/groups/SDRPlay

Fones
Posts: 17
Joined: Mon Oct 19, 2015 3:42 pm

Re: Low limit "Warning Out of Range"

Post by Fones » Sat Oct 24, 2015 1:11 pm

Perfect. Thank you Paul.
Last edited by Fones on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

mwtp
Posts: 4
Joined: Sat Oct 24, 2015 1:23 pm

Re: Low limit "Warning Out of Range"

Post by mwtp » Sun Oct 25, 2015 11:42 am

Hi folks,

How do you reg edit in W7.

73`s
Mark
Last edited by mwtp on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

vsboost
Posts: 23
Joined: Mon Oct 26, 2015 8:06 am

Re: Low limit "Warning Out of Range"

Post by vsboost » Mon Oct 26, 2015 8:09 am

Just click the start menu, type regedit and press enter.
Last edited by vsboost on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Fones
Posts: 17
Joined: Mon Oct 19, 2015 3:42 pm

Re: Low limit "Warning Out of Range"

Post by Fones » Mon Oct 26, 2015 1:08 pm

mwtp wrote:Hi folks,

How do you reg edit in W7.

73`s
Mark
If you have a Facebook account, you'll find a ready-made file to do the job.

https://www.facebook.com/groups/sdrplay/files/
Last edited by Fones on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

mwtp
Posts: 4
Joined: Sat Oct 24, 2015 1:23 pm

Re: Low limit "Warning Out of Range"

Post by mwtp » Mon Oct 26, 2015 2:38 pm

Thanks for the reply`s guys, will have a look when home from work.

73`s
Mark
Last edited by mwtp on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

mwtp
Posts: 4
Joined: Sat Oct 24, 2015 1:23 pm

Re: Low limit "Warning Out of Range"

Post by mwtp » Mon Oct 26, 2015 10:23 pm

Loaded the file from Facebook and that did the trick, thanks again.

73`s
Mark
Last edited by mwtp on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply