Page 1 of 1
Low limit "Warning Out of Range"
Posted: Thu Oct 22, 2015 11:06 am
by Fones
Jon, can you remove the annoying "Warning Out of Range" dialogue box that I'm assuming is generated my the EXTIO when I go under 100 kHz. I can eventually trick HDSDR/SDR# to allow me to tune lower, but it's a bit of a fudge.
Cheers.
Re: Low limit "Warning Out of Range"
Posted: Sat Oct 24, 2015 4:25 am
by NN4F
You can do a registry edit....
To do this you need to manually add the LowerFqLimit key to the registry in HKEY_CURRENT_USER\Software\SDRplay\Settings and then apply a number between 0 and 100 (in decimal). 100 would be 100kHz lower cut off, 50 50kHz and so on.
Paul -NN4F
Re: Low limit "Warning Out of Range"
Posted: Sat Oct 24, 2015 1:11 pm
by Fones
Perfect. Thank you Paul.
Re: Low limit "Warning Out of Range"
Posted: Sun Oct 25, 2015 11:42 am
by mwtp
Hi folks,
How do you reg edit in W7.
73`s
Mark
Re: Low limit "Warning Out of Range"
Posted: Mon Oct 26, 2015 8:09 am
by vsboost
Just click the start menu, type regedit and press enter.
Re: Low limit "Warning Out of Range"
Posted: Mon Oct 26, 2015 1:08 pm
by Fones
mwtp wrote:Hi folks,
How do you reg edit in W7.
73`s
Mark
If you have a Facebook account, you'll find a ready-made file to do the job.
https://www.facebook.com/groups/sdrplay/files/
Re: Low limit "Warning Out of Range"
Posted: Mon Oct 26, 2015 2:38 pm
by mwtp
Thanks for the reply`s guys, will have a look when home from work.
73`s
Mark
Re: Low limit "Warning Out of Range"
Posted: Mon Oct 26, 2015 10:23 pm
by mwtp
Loaded the file from Facebook and that did the trick, thanks again.
73`s
Mark