use SDRplay as scanner with stored channels (frequencies)

Post information or questions regarding SDRplay products here
Post Reply
Posts: 1
Joined: Wed Nov 28, 2018 6:08 pm

use SDRplay as scanner with stored channels (frequencies)

Post by Scannie » Wed Nov 28, 2018 7:50 pm


I'm a new user of the SDRplay and want to use it as a ' normal' radio scanner.

What I want is:
Store selected channels (frequencies) in a preset memory.
Scan only these channels.
When there is communication, stop scanning and play the communication via the speaker.
When communication is stopped, start scanning the selected channels again.

I tried SDRuno, but couldn't find this option.
Who can help me?
Is this possible with SDRuno, or maybe with alternative software?

Last edited by Scannie on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Re: use SDRplay as scanner with stored channels (frequencies)

Post by Paul » Thu Nov 29, 2018 8:13 am

SDRuno does not currently include a scanning function. However, see the following.
For information regarding scanning using SDRuno see: ... -road-map/
Specifically V1.3

Also, have a look at the memory panel functions (the intent seems to have always been to provide this facility.

However, if you're in a rush, older versions of SDR# eg 1361 will work with a RSP (assuming that you have one)
I hope this may be of use.

Reason: No reason

Post Reply