Page 1 of 1
Leave feedback here re remote RSP using v2.sdrspace.com
Posted: Wed Feb 11, 2015 9:51 pm
by jon
Please leave your feedback here re your experiences using SDR-Console remote access to the SDRplay RSP with an HF wire antenna
Re: Leave feedback here re remote RSP using v2.sdrspace.com
Posted: Tue Feb 17, 2015 10:48 am
by jon
Many thanks to ON2PCO for his great article on his 'out of the box' experience with the RSP - he too has made his RSP available for others to try - his screen by screen picture article is probably easier to follow than our video!

See
http://on2pco.be/projects/sdrplay-receiver/
Re: Leave feedback here re remote RSP using v2.sdrspace.com
Posted: Thu Feb 19, 2015 9:05 am
by G4ABQ
there are some FM DX measurements showing sensitivity of the SDRplay RSP here
http://www.sdrplay.com/JHweb/FMDX.html
Re: Leave feedback here re remote RSP using v2.sdrspace.com
Posted: Fri Jul 10, 2015 2:15 am
by k3uk
In the video (
https://www.youtube.com/watch?v=4UrOvD09UXM ) the SDR-Radio Console VFO displays a signal that is essentially useless because even a very narrow HF signal is displayed so widely in the VFO. I experienced the same thing when test driving the remote SDRplay via SDR-Radio. Is this just because of the remote connection. I assume that if one has a SDRplay physically connected and using SDR-Console that the SDR-Radio 6 VFOs would be able to display signals on so that multiple narrow signal good be seen.

Re: Leave feedback here re remote RSP using v2.sdrspace.com
Posted: Sun Jul 12, 2015 6:54 am
by jon
yes, there are limitations with remote access. In the video, we deliberately kept the wide span since it was just a demo - also that was a much earlier version of SDR-Console for SDRplay. Regarding the specifics of what is possible, you will get a lot of advice quicker from regular SDR-Console RSP users if you also post your question on the facebook user group - see
https://www.facebook.com/groups/sdrplay/ Jon