Windows 10 Anniversary Update - Cannot Verify Digital Signature

Post information or questions regarding SDRplay products here
N1ZZN
Posts: 2
Joined: Tue Aug 23, 2016 10:17 pm

Windows 10 Anniversary Update - Cannot Verify Digital Signature

Postby N1ZZN » Tue Aug 23, 2016 10:24 pm

Since updgrading to the latest version of Windows 10, my driver for the SDRPlay (Mirics FlexTV) has been showing up in device manager with an error:

"Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)"

If I restart the computer in the mode where drivers are not required to be signed, it works fine, but it has become quite annoying having to do this every time.

Has anyone else experienced this, or have any thoughts?
Last edited by N1ZZN on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Misterj
Posts: 63
Joined: Wed Apr 06, 2016 6:40 pm

Re: Windows 10 Anniversary Update - Cannot Verify Digital Signature

Postby Misterj » Thu Aug 25, 2016 8:07 pm

N1ZZN, please see this. Please open a administrator command prompt and type winver. If your W10 is version 1607, then this may well be your problem. The driver author needs to release a new driver signed properly. Enjoy, John.
Last edited by Misterj on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

kc3ele
Posts: 1
Joined: Tue Sep 06, 2016 11:35 pm

Re: Windows 10 Anniversary Update - Cannot Verify Digital Signature

Postby kc3ele » Tue Sep 06, 2016 11:38 pm

I had the same problem and found the work around was to disable secure boot.
Last edited by kc3ele on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 540
Joined: Wed Jan 07, 2015 7:58 am

Re: Windows 10 Anniversary Update - Cannot Verify Digital Signature

Postby sdrplay » Mon Sep 19, 2016 11:07 am

It's taken longer than we anticipated but we now have a Windows 10 build 1607 secure boot compatible driver.

It's in the SDRuno 1.03 released last night and either later today or early tomorrow we will be releasing an updated API with the new driver.

We apologise for the inconvenience and appreciate everyone's patience whilst we sorted this out.

Best regards,

SDRplay Support
Last edited by sdrplay on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Misterj
Posts: 63
Joined: Wed Apr 06, 2016 6:40 pm

Re: Windows 10 Anniversary Update - Cannot Verify Digital Signature

Postby Misterj » Mon Sep 19, 2016 3:41 pm

I have just tested both SDRuno 1.02 and 1.03 in W10 version 1607 with SecureBoot enabled. Version 1.02 fails and 1.03 runs correctly. The Device Manager shows the The Mirics FlexiTV (MSi2500) as "This device is working properly." under 1.03. I am running W10 Pro x64 using Hyper-V with W10 Pro x64 v1607 on the VM. USB over Network Version 5.1.11, from FabulaTech is being used to allow the VM to connect to the SDRPlay plugged into my host. All good, thanks! Enjoy, John.
Last edited by Misterj on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

N1ZZN
Posts: 2
Joined: Tue Aug 23, 2016 10:17 pm

Re: Windows 10 Anniversary Update - Cannot Verify Digital Signature

Postby N1ZZN » Tue Sep 20, 2016 1:45 pm

Thanks! This update solved the problem for me.
Last edited by N1ZZN on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason


Return to “SDRplay related”

Who is online

Users browsing this forum: Yahoo [Bot] and 2 guests