Looking for a Wellbrook LF1010

Useful information regarding antennas for SDR products.
Post Reply
petepdx
Posts: 3
Joined: Wed Dec 13, 2017 7:09 pm

Looking for a Wellbrook LF1010

Post by petepdx » Fri Apr 13, 2018 12:51 am

The LF1010 went down to 10 KHz

Like to acquire one.

-pete
Last edited by petepdx on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Paul
Posts: 355
Joined: Fri Feb 17, 2017 9:52 am
Location: SW UK

Re: Looking for a Wellbrook LF1010

Post by Paul » Fri Apr 13, 2018 5:57 am

Hi Pete
Do't know whether this may be of interest...

https://www.ebay.co.uk/itm/Wellbrook-Co ... Sww9xZAfdE

Reason: No reason

petepdx
Posts: 3
Joined: Wed Dec 13, 2017 7:09 pm

Re: Looking for a Wellbrook LF1010

Post by petepdx » Sat Apr 14, 2018 5:29 am

I contacted them to see if would ship to the US and if they would take an offer

thanks

-pete
Last edited by petepdx on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: Looking for a Wellbrook LF1010

Post by g1hbe » Sat Apr 14, 2018 8:03 am

It's worth remembering that the LA1530 works down to at least 20 KHz. There's a group of 4 or 5 data sigs around 20 KHz that come in well here in NW England. I suspect the response is dropping by this point though, so if you need to hear down to 10 KHz, maybe the LF1010 would be better. I've attached a shot of the 0 - 200 KHz spectrum as received here. I think I had a 100 KHz LPF in at the time to reduce the big LW broadcast sigs. The hump in the middle is Loran and the 20 KHz sigs are well above the noise.
lfsmall.jpg
lfsmall.jpg (180.61 KiB) Viewed 17210 times

Reason: No reason
Andy

petepdx
Posts: 3
Joined: Wed Dec 13, 2017 7:09 pm

Re: Looking for a Wellbrook LF1010

Post by petepdx » Tue May 08, 2018 1:09 pm

Due to a misunderstanding I was not able to get the LF 1010 that was on Ebay.

So I am still looking for one.

Will come up with a mutually agreeable finders reward this time !!

-pete
Last edited by petepdx on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply