Antenna conector

Useful information regarding antennas for SDR products.
Post Reply
cmgam
Posts: 9
Joined: Thu Oct 18, 2018 8:17 pm

Antenna conector

Post by cmgam » Thu Oct 18, 2018 8:28 pm

Hi
What type of connector to connect the antenna to SDRplay.
Thanks in advance
Regards
Last edited by cmgam on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
cmgam

AussieSusan
Posts: 30
Joined: Wed Aug 16, 2017 6:50 am

Re: Antenna conector

Post by AussieSusan » Fri Oct 19, 2018 1:54 am

Check the data sheet for the particular hardware you are interested in. For example the RSP2 uses SMA female connectors.
Susan

Reason: No reason

g1hbe
Posts: 494
Joined: Sat Jan 17, 2015 3:28 pm
Location: Cheshire, UK

Re: Antenna conector

Post by g1hbe » Fri Oct 19, 2018 7:32 am

All antenna connectors are female SMA, so you'll need MALE SMA leads to stick in them. The only exception is the Hi-Z connector on the RSP2 and the Duo, which is a 3-pin type like this: https://www.sdr-kits.net/Hi-Z-Connector-RSP2

Reason: No reason
Andy

cmgam
Posts: 9
Joined: Thu Oct 18, 2018 8:17 pm

Re: Antenna conector

Post by cmgam » Fri Oct 19, 2018 6:23 pm

Hi
Thanks.
Regards
Last edited by cmgam on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
cmgam

Post Reply