Ver 1.22 Menus

Discussions about everything to do with SDRuno
Post Reply
hamrad
Posts: 1
Joined: Sat Aug 06, 2016 7:12 pm

Ver 1.22 Menus

Post by hamrad » Sat Mar 24, 2018 12:46 pm

I see you can change the step size for each mode with a pulldown menu but how to you get that menu.

Thanks,

Tom
Last edited by hamrad on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: Ver 1.22 Menus

Post by sdrplay » Sat Mar 24, 2018 1:46 pm

right click on the frequency display in the RX control window

Best regards,

SDRplay Support

Reason: No reason

JJ_in_TN
Posts: 25
Joined: Wed Jun 07, 2017 10:04 pm

Re: Ver 1.22 Menus

Post by JJ_in_TN » Fri May 11, 2018 4:22 am

right click on the frequency display in the RX control window

Best regards,

SDRplay Support
This information really belongs in the manual. I searched quite a long time before finding this post. A search on "step" in the manual pdf gets you 37 hits but none related to this function.

73
Last edited by JJ_in_TN on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

JMG
Posts: 23
Joined: Thu Mar 26, 2015 9:58 pm

Re: Ver 1.22 Menus

Post by JMG » Fri May 11, 2018 8:03 am

And how to store the new setting?

Reason: No reason

Mike2459
Posts: 318
Joined: Mon Jul 24, 2017 8:24 pm

Re: Ver 1.22 Menus

Post by Mike2459 » Fri May 11, 2018 3:07 pm

Pages from v1.jpg
Pages from v1.jpg (130.52 KiB) Viewed 3252 times
AFAIK there is no provision in SDRUno to store user defined bandwidth settings.

Section 3.8 of SDRUno version v1.2 manual, not in 1.22 version!!

3.8 Changing the tuning step

Each Mode has a default tuning step size. This can be changed by Right-clicking on the RX Control frequency dial: the dial step menu will popup. Select the desired tuning step.

AM = 1 kHz
SAM = 1 kHz
FM = 5 kHz
CW = 10 Hz
DSB = 250 kHz
LSB = 250 kHz
USB = 250 kHz

Reason: No reason

Post Reply