Scanner Is Pretty Good, But...

Discussions about everything to do with SDRuno
Post Reply
NORVIN
Posts: 4
Joined: Sat Jun 15, 2019 10:29 pm

Scanner Is Pretty Good, But...

Post by NORVIN » Sat Jun 15, 2019 10:55 pm

It needs some improvements. It seems like it uses the same way that the Frequency Manager Suite plugin for SDR# uses and will stop to the sides (but not on) a strong active frequency sometimes. I would suggest instead using the way the Russian RTL-SDR FrequencyManager plugin for SDR# does it by actually stopping on the exact frequency if active regardless of strength.
Last edited by NORVIN on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: Scanner Is Pretty Good, But...

Post by sdrplay » Sun Jun 16, 2019 8:27 am

The SDRuno scanner is purely a channelised system. If the specified step size is smaller than the specified audio bandwidth and if the threshold isn't optimised, then it could settle on the sides of a signal, but if used correctly that's not really likely.

Reason: No reason

NORVIN
Posts: 4
Joined: Sat Jun 15, 2019 10:29 pm

Re: Scanner Is Pretty Good, But...

Post by NORVIN » Sun Jun 16, 2019 4:24 pm

If the threshold is raised to avoid this then weaker signals will not be stopped on during scans.
Last edited by NORVIN on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply