Spectrum Monitor Question

Post information or questions regarding SDRplay products here
Post Reply
Lubecktech
Posts: 2
Joined: Mon Jan 04, 2016 6:33 pm

Spectrum Monitor Question

Post by Lubecktech » Mon Jan 04, 2016 6:52 pm

I have been working with cheap SDR dongles for a wjile now and just got a used SDR Play. It is one with the blue & white case and "F" connector. Can I view an 8Mhz span on the spectrum monitor and if sh how do I accomplish that?? So far I have SDR# working (used this for a long time) and SDR Console but have not become familiar with it. I have not yet got HDSR to work yet and any help would be appreciated as it seems to be a bit more difficult to set up.
Last edited by Lubecktech on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

NN4F
Posts: 128
Joined: Fri Apr 03, 2015 1:54 pm
Location: Ridgeville, SC
Contact:

Re: Spectrum Monitor Question

Post by NN4F » Tue Jan 05, 2016 12:47 am

It id done in the ExtIO control panel, select the 8mhz bandwidth, or in sdr-console, when startup and selecting the radio, choose 8mhz as the sample rate. Look under the windows section of the sdrplay.com website and then at the bottom look at the community files, there is a document for sdr-console and HDSDR to help you get started....

Paul - NN4F
Last edited by NN4F on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
--
Paul Jones - NN4F, Charleston SC
http://www.facebook.com/groups/SDRPlay

Lubecktech
Posts: 2
Joined: Mon Jan 04, 2016 6:33 pm

Re: Spectrum Monitor Question

Post by Lubecktech » Wed Jan 06, 2016 8:56 pm

Thanks Paul!!

I now have HDSDR and SDR Console running along with SDR#.
SDR# is the easiest to use but not as versatile as the other two. With SDR console I can watch 5mhz on the monitor and listen but with HDSDR I can watch 8mhz but am not able to listen unless I cut the bandwidth back to 2mhz.
Is there any software for this or other USB SDRs to work as a scanner on non-trunked systems?? I have been using unitrunker and various decoders to monitor P25 and TRBO trunked systems and would love to scan conventional channels.
Last edited by Lubecktech on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

NN4F
Posts: 128
Joined: Fri Apr 03, 2015 1:54 pm
Location: Ridgeville, SC
Contact:

Re: Spectrum Monitor Question

Post by NN4F » Mon Jan 11, 2016 5:31 am

You can download CSVUserlist, from http://www.df8ry.de/htmlen/csvub/ovHDSDR.htm
this will allow you to step through frequencies using HDSDR & SDR-Console once you setup with HDSDR, the same settings will work with console

Paul - NN4F
Last edited by NN4F on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
--
Paul Jones - NN4F, Charleston SC
http://www.facebook.com/groups/SDRPlay

Post Reply