No adjustments
-
- Posts: 7
- Joined: Tue Mar 31, 2015 4:17 pm
No adjustments
Hello all.
I cant get any adjustments to work with latest Api update on Sdr# v1430?
If I set band width to anything above 1.5mhz it does not take also not showing spot frequencies that I use for calibration (local air info on 131.350). Compaired to my previous version of Sdr# and all good. Is the Sdr# people not supporting us anymore
Thanks Kev
I cant get any adjustments to work with latest Api update on Sdr# v1430?
If I set band width to anything above 1.5mhz it does not take also not showing spot frequencies that I use for calibration (local air info on 131.350). Compaired to my previous version of Sdr# and all good. Is the Sdr# people not supporting us anymore
Thanks Kev
Last edited by kevtheskin on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
-
- Posts: 499
- Joined: Mon Jun 01, 2015 7:00 pm
Re: No adjustments
Hello Kev,
We saw something similar with r1430 of SDR#. We found that stopping and re-starting SDR# seemed to clear the problem. At this stage, we have no idea why this might occur.
Sincerely
SDRplay Tech_Support
We saw something similar with r1430 of SDR#. We found that stopping and re-starting SDR# seemed to clear the problem. At this stage, we have no idea why this might occur.
Sincerely
SDRplay Tech_Support
Last edited by Tech_Support on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: No adjustments
Something else I've spotted with build 1430 and SDRPlay# - on WFM I only get audio on the stronger signals - it very much looks like the squelch - which doesn't normally affect WFM - is in operation and can't be over-ridden. Switching to NFM or AM - with obvious distortion - the squelch works.
Has anyone else noticed the same thing?
I'm keenly following the SDR console developments.
David
Has anyone else noticed the same thing?
I'm keenly following the SDR console developments.
David
Last edited by DaveB on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason