SDRSharper

General discussions
vsboost
Posts: 23
Joined: Mon Oct 26, 2015 8:06 am

SDRSharper

Postby vsboost » Fri Nov 06, 2015 10:10 am

This software is an alternative to SDR#

There has been some talk about the legalities of this software but i am of the understanding that it is based on the code of SDR# when it was OPEN SOURCE.

If anybody is interested the link is here.

http://www.filedropper.com/sdrsharper03h

Its embedded with the extio_sdrplay.dll file so just unzip it where you want and run.
Last edited by vsboost on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Fones
Posts: 17
Joined: Mon Oct 19, 2015 3:42 pm

Re: SDRSharper

Postby Fones » Fri Nov 06, 2015 10:58 am

SDRsharp was still using MIT licencing on even later versions than SDRshaper is based around. Modifying and distribution is permitted under MIT. I see nothing that enables that licence can be withdrawn at a later stage. As far as I see it, SDRsharper is fully compliant.
Last edited by Fones on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

DaveB
Posts: 129
Joined: Sun Feb 01, 2015 6:04 pm

Re: SDRSharper

Postby DaveB » Fri Nov 06, 2015 4:34 pm

I'm not sure why anyone would want to use SDRSharper when you can get hold of a copy of SDR Sharp 1361 - which was also released under the MIT licence. Just type "build 1361" into the search bar on this forum to find the link. You will have to scan down the entries to find the correct post and there is also a link to all the old plug-ins from the russian web-site that work with this build.

If you want a good frequency manager go to fmsuite.net - the version which works with this build is available there.

David
Last edited by DaveB on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Abrassart
Posts: 31
Joined: Thu Aug 20, 2015 5:18 pm

Re: SDRSharper

Postby Abrassart » Sun Nov 08, 2015 4:45 pm

hello david,

yes ,sdrsharper is very very good,full but a little complicate to use
it runs very well and i am now a user.
You don't know a tutorial on the net to use without problem,i like.
Thank you for your help
léon
Last edited by Abrassart on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

someYguy
Posts: 46
Joined: Sun Apr 10, 2016 7:12 pm

Re: SDRSharper

Postby someYguy » Sun Apr 10, 2016 7:19 pm

Wow. From what I can see, SDRSharper is a FAR superior program as compared to SDRSharp. And more stable also. Too bad its development died. :(.
Last edited by someYguy on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

13dka
Posts: 127
Joined: Sun Feb 14, 2016 8:40 am

Re: SDRSharper

Postby 13dka » Mon Apr 11, 2016 1:09 am

Link doesn't seem to work anymore? :/
Last edited by 13dka on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

slehy
Posts: 3
Joined: Sun Mar 06, 2016 12:47 pm

Re: SDRSharper

Postby slehy » Mon Apr 11, 2016 5:14 pm

Here is the download.
http://www.qsl.net/s/sdr/
Last edited by slehy on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

13dka
Posts: 127
Joined: Sun Feb 14, 2016 8:40 am

Re: SDRSharper

Postby 13dka » Mon Apr 11, 2016 7:22 pm

Sweet! Thank you very much Sir!
Last edited by 13dka on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

dschre
Posts: 4
Joined: Thu Feb 04, 2016 6:39 pm

Re: SDRSharper

Postby dschre » Wed Apr 13, 2016 5:49 pm

Having good results using SDRSharper and appreciate that the plug-ins were installed along with the application.

Does anyone know how to install additional SDRSharp plugins? One I used in SDRSharp (v 1361 and earlier) was a DDE tracking Client to adjust for doppler affect on satellite reception. Installed it as I would have on SDRSharp, but SDR Sharper doesn't like it although it did create a panel for it.

Maybe version incompatibility?

Any help appreciated

Richard
Arizona USA
Last edited by dschre on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

dschre
Posts: 4
Joined: Thu Feb 04, 2016 6:39 pm

Re: SDRSharper

Postby dschre » Wed Apr 13, 2016 11:13 pm

The problem described in my previous message with the DDE Tracking Client has been resolved. Didn't realize there were two ddl files required. After copying the second one into the folder, all is working as expected.

This plug-in is very useful if you are tracking satellites with WXtrack. It continuously adjusts the frequency in SDRSharper (or SDRSharp) to compensate for Doppler shift.


Richard
Last edited by dschre on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason


Return to “General”

Who is online

Users browsing this forum: Bing [Bot], Yahoo [Bot] and 3 guests