Calibrate S-Meter

Discussions about everything to do with SDRuno
Post Reply
DPH200
Posts: 1
Joined: Sun Jun 19, 2016 9:34 pm

Calibrate S-Meter

Post by DPH200 » Sun Jun 19, 2016 9:48 pm

First, thanks for the great software.
This makes the RSP really perfect.

Now my question.
If I calibrate the S-meter it has no effect on the dbm scale
of the Main spectrum. Am I doing something wrong?

73, DPH200
Joachim
Last edited by DPH200 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Hombre
Posts: 19
Joined: Sat Oct 10, 2015 9:20 am

Re: Calibrate S-Meter

Post by Hombre » Thu Jun 30, 2016 3:17 pm

DPH200 wrote:If I calibrate the S-meter it has no effect on the dbm scale
of the Main spectrum. Am I doing something wrong?
No.
To much is wrong in the SDRuno.
It is impossible to set noise level on the main scale and all the time is to high.

Zoom work only to the half of the kHz. Some time work in decimals when change BW between 0,2 and 0,3 MHz but in 99,9% work only on the half of kHz.
In the SP2 window is possible to change width but middle is fixed to 700.
In the SP2 spectrum is tremendous slow and when signal started must wait second or two for waterfall signal.
And other. And other.

There is new program and is normal to have bugs.
Last edited by Hombre on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply