SDRuno 1.1 can not enter the 300kHz bandwidth
SDRuno 1.1 can not enter the 300kHz bandwidth
Dear support
I have updated SDRuno 1.1
But I can't set the bandwidth of 300kz.
Old version SDRuno 1.0x can be set
I found that the minimum bandwidth of the spectrum can only be selected 2MHz
Narrow band signals are not easy to be manipulated in the window SP1
How to set the spectrum SP1 minimum display bandwidth?
Sorry bad english
de BA2Bi , Wu
I have updated SDRuno 1.1
But I can't set the bandwidth of 300kz.
Old version SDRuno 1.0x can be set
I found that the minimum bandwidth of the spectrum can only be selected 2MHz
Narrow band signals are not easy to be manipulated in the window SP1
How to set the spectrum SP1 minimum display bandwidth?
Sorry bad english
de BA2Bi , Wu
Last edited by BA2Bi on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: SDRuno 1.1 can not enter the 300kHz bandwidth
Hello,
If you set the sample rate to 3MHz and the decimation to 8 that will give you a final sample rate of 375kHz and SDRuno will automatically select a 300kHz IF filter bandwidth.
Best regards,
SDRplay Support
If you set the sample rate to 3MHz and the decimation to 8 that will give you a final sample rate of 375kHz and SDRuno will automatically select a 300kHz IF filter bandwidth.
Best regards,
SDRplay Support
Reason: No reason
Re: SDRuno 1.1 can not enter the 300kHz bandwidth
Thank you very much for a very quick reply.
I have set the spectrum bandwidth 200kHz(IFBW)
SR(MHZ)=2
DEC=8
Thanks!
I have set the spectrum bandwidth 200kHz(IFBW)
SR(MHZ)=2
DEC=8
Thanks!
Last edited by BA2Bi on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason