Sdrsharp pluggin

Post information or questions regarding SDRplay products here
Post Reply
kevtheskin
Posts: 7
Joined: Tue Mar 31, 2015 4:17 pm

Sdrsharp pluggin

Post by kevtheskin » Fri Jan 13, 2017 12:52 pm

Hi everyone,

I am trying to install the Sdrsharp plugin version2.2. It keeps bring up an error setup has detected a problem with this Sdrsharp install.

Any ideas.

Cheers Kev

Reason: No reason

sdrplay
Posts: 978
Joined: Wed Jan 07, 2015 7:58 am

Re: Sdrsharp pluggin

Post by sdrplay » Tue Jan 17, 2017 8:26 am

During the install of the plugin, it will require you to navigate to your SDR# installation directory and select the SDRSharp.exe before continuing.

Please note that this is only for SDR# version greater than 1411 and will only provide basic tuning for the RSP1. The RSP2 is not supported. You will also need an old version of the API which you can get here if you don't have it: http://www.sdrplay.com/software/MiricsS ... r_1.97.exe

Best regards,

SDRplay Support

Reason: No reason

JMG
Posts: 23
Joined: Thu Mar 26, 2015 9:58 pm

Re: Sdrsharp pluggin

Post by JMG » Tue Jan 17, 2017 7:59 pm

Works fine with SDRsharper(v0.5k) too.

Reason: No reason

ic706mk2
Posts: 4
Joined: Wed Jan 18, 2017 10:03 am

Re: Sdrsharp pluggin

Post by ic706mk2 » Wed Jan 18, 2017 10:09 am

Hey,

@Jmg..

Don't work by me..what did you do..only the old api or must we do something else also?
Change the Sharper.exe to Sharp.exe???
SDRSharp much better to works with .

Greetings

Luc
Last edited by ic706mk2 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

supwiddiss
Posts: 14
Joined: Tue May 09, 2017 9:03 pm

Re: Sdrsharp pluggin

Post by supwiddiss » Tue May 09, 2017 11:23 pm

New to this. A day into my RSP2pro. Due to the amount of plugins for # it was my assumption that the RSP2 would be a breeze to get working with it.
No Joy!
HDSDR and SDRConsole seem limited for plugins also, Hence it looks like I have a simple radio receiver and need to use VAC/VB Cable to pipe into the other applications that I accepted would seamlessly work with the RSP2.
Any and all comments are welcome. I am an EE with tons of years using HAM equipment and anything electronic that is fun.
Cheers.
Last edited by supwiddiss on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

Post Reply