SDRplay SDR2 pics & description of connections needed

[K1OPQ]

Hi-
I just purchased the SDRplay RSP2. I have not been able to find any identification of all the connecting terminals. I've been looking for a picture, that would help.

Can anyone point me in the right direction?

Thanks

[Tech_Support]

The ports are shown on the second page of the datasheet:

http://www.sdrplay.com/docs/RSP2_Datasheet.pdf

Sincerely

SDRplay Tech_Support

[jon]

Additional useful information about the RSP2 ports can be found here:

For an app note on connecting to the "High Z" port for frequencies below 30 MHz and all the way down to 1 kHz, go to: http://www.sdrplay.com/wp-content/uploa ... uidev2.pdf


There's a short video guide to the antenna connections here - https://youtu.be/YAtT97Ash8E

And also, for SDRuno users, go 3 minutes and 30 seconds into this video to see how the ports are selected: https://youtu.be/92Ijh_NAEfc

PS: There is a growing set of videos being provided both by SDRplay and more importantly, by the user community for a growing number of applications. If you either make or come across a useful video not listed in one of the playlists on the SDRplay YouTube channel, then let me know at jon.hudson at sdrplay.com

The SDRplay YouTube channel can be found at https://www.youtube.com/c/SDRplayRSP