Amateur VHF/UHF Problem
Amateur VHF/UHF Problem
I am having difficulty tuning into the Ham Radio bands VHF and UHF...Can anyone give me a quick tutorial on how to tune them in with my SDR Play? Thanks...
Steve
Steve
Last edited by KA1OWC on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Steve Ziegler
KA1OWC
Lieutenant Colonel (Ret)
United States Army
KA1OWC
Lieutenant Colonel (Ret)
United States Army
Re: Amateur VHF/UHF Problem
Check that LO LOCK in the MAIN window is disabled (not highlighted). If LO LOCK is enabled, that will restrict VFO tuning to within the IF BW and centred on the LO frequency. With LO LOCK disabled, you should be able to enter desired frequency per the instructions in the user manual. There's nothing special about entering frequencies for the amateur 2m and 70cm bands vs. any other frequency supported by the RSP.
Last edited by hfsdpk11 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
Re: Amateur VHF/UHF Problem
Make sure to enable the LNA (left button in the MAIN window).
-Noel
-Noel
Reason: No reason