Amateur VHF/UHF Problem

Discussions about everything to do with SDRuno
Post Reply
KA1OWC
Posts: 20
Joined: Thu May 11, 2017 9:59 pm

Amateur VHF/UHF Problem

Post by KA1OWC » Fri May 12, 2017 5:01 pm

I am having difficulty tuning into the Ham Radio bands VHF and UHF...Can anyone give me a quick tutorial on how to tune them in with my SDR Play? Thanks...

Steve
Last edited by KA1OWC on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Steve Ziegler
KA1OWC
Lieutenant Colonel (Ret)
United States Army

hfsdpk11
Posts: 35
Joined: Mon May 01, 2017 5:00 pm

Re: Amateur VHF/UHF Problem

Post by hfsdpk11 » Sun May 14, 2017 11:33 am

Check that LO LOCK in the MAIN window is disabled (not highlighted). If LO LOCK is enabled, that will restrict VFO tuning to within the IF BW and centred on the LO frequency. With LO LOCK disabled, you should be able to enter desired frequency per the instructions in the user manual. There's nothing special about entering frequencies for the amateur 2m and 70cm bands vs. any other frequency supported by the RSP.
Last edited by hfsdpk11 on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

NoelC
Posts: 137
Joined: Sun Nov 27, 2016 11:50 pm

Re: Amateur VHF/UHF Problem

Post by NoelC » Sun May 14, 2017 2:50 pm

Make sure to enable the LNA (left button in the MAIN window).

-Noel

Reason: No reason

Post Reply