RSP2 recognized as RSP1
RSP2 recognized as RSP1
I recently purchased an RSP2 and have been running into problems installing the drivers. Each time I try to install either SDRuno or any of the other installers off the SDRplay site the RSP1 drivers install. I've tried this on multiple computers and have even tried manually setting the driver to RSP2. Once this is done SDRuno doesn't recognize that any SDR is connected. I'm sure this is the same problem as highlighted in this post, but I was unable to resolve it using the advice given in it.
viewtopic.php?f=7&t=1737&p=5558&hilit=driver#p5558
viewtopic.php?f=7&t=1737&p=5558&hilit=driver#p5558
Last edited by spockly on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason
Reason: No reason
-
- Posts: 499
- Joined: Mon Jun 01, 2015 7:00 pm
Re: RSP2 recognized as RSP1
Hello Spockly,
Please contact us via our support ticketing system: http://www.sdrplay.com/support/
We will try resolve this for you.
Best regards
SDRplay Tech_Support
Please contact us via our support ticketing system: http://www.sdrplay.com/support/
We will try resolve this for you.
Best regards
SDRplay Tech_Support
Reason: No reason