RSP2 Question

Post your feedback here
Pascha
Posts: 2
Joined: Fri Oct 13, 2017 10:25 am

RSP2 Question

Postby Pascha » Fri Oct 13, 2017 10:31 am

Hello
I bought a RSP2 and today I try to connect it to my Mac, but nothing happens. I tried CubicSDR and GQRX but both do not find my RSP2. I tried several USB cable . The API driver is installed. Please help.
Regards Guenter from Germany.
Last edited by Pascha on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 605
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP2 Question

Postby sdrplay » Fri Oct 13, 2017 12:35 pm

Either click refresh in the CubicSDR device selection window (there is a bug that requires the RSP to be discovered twice on some Mac machines) or if that doesn't work, type the following into a command prompt and post the results...

SoapySDRUtil --probe=sdrplay

You can always contact us on Support (http://www.sdrplay.com/support) and we'll be able to help you.

Best regards,

SDRplay Support

Reason: No reason

Pascha
Posts: 2
Joined: Fri Oct 13, 2017 10:25 am

Re: RSP2 Question

Postby Pascha » Fri Oct 13, 2017 2:55 pm

Hello, now it works, but unfortunately I can not adjust bandwidth, or antenna input, etc. as in the SDRuno software. Is this not possible?
regards
Last edited by Pascha on Thu Jan 01, 1970 12:00 am, edited 0 times in total.
Reason: No reason

sdrplay
Posts: 605
Joined: Wed Jan 07, 2015 7:58 am

Re: RSP2 Question

Postby sdrplay » Fri Oct 13, 2017 2:59 pm

Yes, go back to the device selection menu and you can change both. I believe in the latest version of the hardware library that works with CubicSDR you can change those items from the CubicSDR menu directly.

Best regards,

SDRplay Support

Reason: No reason

mark.
Posts: 13
Joined: Tue Oct 03, 2017 9:14 pm

Re: RSP2 Question

Postby mark. » Fri Oct 13, 2017 8:51 pm

For future reference, which one of the 2 suggestions fixed the issue of not running on your Mac?

Reason: No reason


Return to “New Users' experiences”

Who is online

Users browsing this forum: No registered users and 1 guest